This is output of do_test_gpc. Curious bug: when the font is not simplex the color in the last column can't be 376, but 4 is ok....

HDD’s + Partition Setup on Wed Jan 26 2011

DEVICE	Version/Label	SIZE	MTIME	c/M
/dev/sda	ata____wdc_wd800jd-60lu	80.0GB	–
/dev/sda1	—	8003.2MB	—	27/28
/dev/sda2	—	1998.7MB	—	44/20
/dev/sda3	2.6.32-5-686-bigmem	14007.7MB	01/26/11	2/30
/dev/sda5	2.6.32-5-amd64	8003.2MB	12/15/10	6/34
/dev/sda6	2.6.37-trunk-686-bigmem	8003.2MB	01/10/11	2/25
/dev/sda7	—	40007.7MB	—	9/20
/dev/sdb	ata____maxtor_6y080p0	82.0GB	–
/dev/sdb1	—	6199.8MB	—	2/32
/dev/sdb5	2.6.36-trunk-686-bigmem	6100.2MB	11/23/10	16/38
/dev/sdb6	2.6.17-ck1	6100.2MB	07/14/06	13/21
/dev/sdb7	2.6.17.14-ck1	27722.6MB	12/23/06	21/38
/dev/sdb10	—	30547.2MB	—	21/29
/dev/sdc	ata____st380011a	80.0GB	–
/dev/sdc1	Not_Found!	8003.2MB	05/17/08	23/30
/dev/sdc2	2.6.36-hvw	8003.2MB	11/22/10	11/30
/dev/sdc3	2.6.32-5-686-bigmem	8003.2MB	12/21/10	11/30
/dev/sdc5	2.6.36-hvw	8003.2MB	11/16/10	28/27
/dev/sdc6	2.6.32-3-686	8003.2MB	06/09/10	17/25
/dev/sdc7	—	40007.7MB	—	7/38
/dev/sdd	wdc_wd16_00aajb-00j3a0	160.0GB	–
/dev/sdd1	—	12000.7MB	—	7/24
/dev/sdd2	—	12000.7MB	—	31/33
/dev/sdd3	2.6.32-5-686-bigmem	12000.7MB	12/28/10	9/24
/dev/sdd5	2.6.32-5-686	12000.7MB	12/16/10	15/35
/dev/sdd6	2.6.32-5-686-bigmem	12000.7MB	01/02/11	22/30
/dev/sdd7	—	39999.5MB	—	21/23
/dev/sdd8	—	60036.3MB	—	5/22
/dev/sde	kingston_datatraveler_2.0	0.3GB	–

This is the wordpress output of do_test_gpc of gpc-qt. It looks for ext2 partitions and looks inside of them for a Linux kernel. The red kernel is the current one.

Installed NVIDIA-Linux-x86-260.19.36.run

2nd from top is the updated wmtemp to work with chip name = atk0110-acpi-0. It uses libsensors4. How cool it would be if you could update these in place from the host... These are Fvwm wharfs...

• Installed acpitool on 01/05/11 and did acpitool -s various times, worked 50% of the time.
• Installed privoxy
• acpitool -S never worked with HDA1 set to swap.
• Jan 6 08:44:15 Debian kernel: [ 1878.522467] PM: Preparing system for mem sleep
• Jan 6 09:10:48 Debian kernel: [ 1885.722200] PM: Finishing wakeup.
• Set BIOS Power Suspend Mode = S3 from Auto.
• First try 1 each day, then 2.
• Jan 7 09:14:16 Debian kernel: [ 4225.954877] PM: Preparing system for mem sleep
• Jan 7 10:29:08 Debian kernel: [ 4233.118359] PM: Finishing wakeup.