Tuesday, December 20, 2011
Sunday, November 13, 2011
Wednesday, November 9, 2011
Sunday, November 6, 2011
Friday, October 7, 2011
Monday, October 3, 2011
- Installed wheezy on partition 0 of the HD502HJ_2 disk in the mew ESATA enclosure. The d-i fails when it still cannot find grub-pc and then hangs on setting the clock: rtc module not found = /var/log/11.install. D-i with desktop and utils.
- That disk is only seen by BIOS if you enable SATA AHCI
- MC from /sda7/hda10/backup.files/debs64
- Htop
- Mplayer
- libqt4-dev
- libqt3-mt-dev
- tleds
- console-tools/data
- apache2
- mysql
- chrony
- TB
- Hyperlatex
- lm-sensors
- ddclient
- sensor-applet
- mindi/mondo
Thursday, September 1, 2011
Saturday, August 6, 2011
Wednesday, July 20, 2011
Monday, July 18, 2011
Saturday, July 9, 2011
Friday, July 8, 2011
Wednesday, July 6, 2011
Tuesday, July 5, 2011
Monday, July 4, 2011
Sunday, July 3, 2011
- This is the new graph created from sysstat data.
- Run Linux and install sysstat.
- The graph has 2 y-axes. The numbers of the axis are a bit confusing because Gpc-qt uses the scales routine to automatically calculate the maxima, but there is a catch ;-) You have to provide the number of divisions, which of course is difficult to do without knowing the maxima.
- I could put it on Facebook (TM) but what the heck then 200.000.000 people would see it.
- A thing to notice is that it shows the breaks when the system was down: at about 10AM and of course that IPL took place at 9:30AM and halt at 3PM.
Saturday, June 11, 2011
Sunday, May 22, 2011
Monday, April 4, 2011
Tuesday, March 22, 2011
Thursday, March 17, 2011
Sunday, March 13, 2011
Saturday, March 12, 2011
Friday, March 11, 2011
Wednesday, March 2, 2011
Thursday, February 24, 2011
Sunday, February 20, 2011
- Found the hyperlatex problem with Debian 6.0 amd64: have no emacs23 packages installed!
- Now Squeeze amd64 = i386 except for the missing Flagship .deb.
- Found Gpc-qt zoom problem: 'disable_button' call had '9' for 1st parm but only 8 strings...
- Found do_sysup one month->3dbars problem: disabled call to tkbfillq at bpltw.cpp #464.
Friday, February 18, 2011
Friday, February 11, 2011
Sunday, February 6, 2011
Thursday, February 3, 2011
Thursday, January 27, 2011
Wednesday, January 26, 2011
HDD’s + Partition Setup on Wed Jan 26 2011
DEVICE | Version/Label | SIZE | MTIME | c/M |
---|---|---|---|---|
/dev/sda | ata____wdc_wd800jd-60lu | 80.0GB | – | |
/dev/sda1 | — | 8003.2MB | — | 27/28 |
/dev/sda2 | — | 1998.7MB | — | 44/20 |
/dev/sda3 | 2.6.32-5-686-bigmem | 14007.7MB | 01/26/11 | 2/30 |
/dev/sda5 | 2.6.32-5-amd64 | 8003.2MB | 12/15/10 | 6/34 |
/dev/sda6 | 2.6.37-trunk-686-bigmem | 8003.2MB | 01/10/11 | 2/25 |
/dev/sda7 | — | 40007.7MB | — | 9/20 |
/dev/sdb | ata____maxtor_6y080p0 | 82.0GB | – | |
/dev/sdb1 | — | 6199.8MB | — | 2/32 |
/dev/sdb5 | 2.6.36-trunk-686-bigmem | 6100.2MB | 11/23/10 | 16/38 |
/dev/sdb6 | 2.6.17-ck1 | 6100.2MB | 07/14/06 | 13/21 |
/dev/sdb7 | 2.6.17.14-ck1 | 27722.6MB | 12/23/06 | 21/38 |
/dev/sdb10 | — | 30547.2MB | — | 21/29 |
/dev/sdc | ata____st380011a | 80.0GB | – | |
/dev/sdc1 | Not_Found! | 8003.2MB | 05/17/08 | 23/30 |
/dev/sdc2 | 2.6.36-hvw | 8003.2MB | 11/22/10 | 11/30 |
/dev/sdc3 | 2.6.32-5-686-bigmem | 8003.2MB | 12/21/10 | 11/30 |
/dev/sdc5 | 2.6.36-hvw | 8003.2MB | 11/16/10 | 28/27 |
/dev/sdc6 | 2.6.32-3-686 | 8003.2MB | 06/09/10 | 17/25 |
/dev/sdc7 | — | 40007.7MB | — | 7/38 |
/dev/sdd | wdc_wd16_00aajb-00j3a0 | 160.0GB | – | |
/dev/sdd1 | — | 12000.7MB | — | 7/24 |
/dev/sdd2 | — | 12000.7MB | — | 31/33 |
/dev/sdd3 | 2.6.32-5-686-bigmem | 12000.7MB | 12/28/10 | 9/24 |
/dev/sdd5 | 2.6.32-5-686 | 12000.7MB | 12/16/10 | 15/35 |
/dev/sdd6 | 2.6.32-5-686-bigmem | 12000.7MB | 01/02/11 | 22/30 |
/dev/sdd7 | — | 39999.5MB | — | 21/23 |
/dev/sdd8 | — | 60036.3MB | — | 5/22 |
/dev/sde | kingston_datatraveler_2.0 | 0.3GB | – |
This is the wordpress output of do_test_gpc of gpc-qt. It looks for ext2 partitions and looks inside of them for a Linux kernel. The red kernel is the current one.
Tuesday, January 25, 2011
Friday, January 7, 2011
- Installed acpitool on 01/05/11 and did acpitool -s various times, worked 50% of the time.
- Installed privoxy
- acpitool -S never worked with HDA1 set to swap.
- Jan 6 08:44:15 Debian kernel: [ 1878.522467] PM: Preparing system for mem sleep
- Jan 6 09:10:48 Debian kernel: [ 1885.722200] PM: Finishing wakeup.
- Set BIOS Power Suspend Mode = S3 from Auto.
- First try 1 each day, then 2.
- Jan 7 09:14:16 Debian kernel: [ 4225.954877] PM: Preparing system for mem sleep
- Jan 7 10:29:08 Debian kernel: [ 4233.118359] PM: Finishing wakeup.
Tuesday, January 4, 2011
Monday, January 3, 2011
Subscribe to:
Posts (Atom)